The Smart Hub: The smart hub includes a Bluetooth receiver for the door sensor, a 2.4 ghz radio to connect to your wireless home network for the system to communicate with Chamberlain’s servers on the internet, and a radio frequency (RF) transmitter to send HomeLink rolling codes to your garage door opener (on a channel in the 300-400mhz range depending on your garage door opener) - just like your remote clicker.
This is a triple A 1 business. I am extremely impressed with the expertise of the technician (Jim A Johnston) who came (on a holiday) to replace my garage door opener. Unfortunately my opener was destroyed by lightning during a terrific thunderstorm. He did an outstanding job and was very professional. He is the kind of gentleman a company should be very proud to have representing them.
Containment cables. When old extension springs break, the springs and cables become heavy whips that damage cars and even injure people. To solve the whipping problem, manufacturers now offer containment cables that run through the center of side-mounted extension springs. If you have extension springs and don’t plan to replace your door, make sure the springs have these containment cables, or have a professional install them.

Garage Door Service Co


Your garage door opener: You obviously have one to which you are adding this system. Do your homework and make sure it’s compatible before you buy. If you’re not positive, call or email them with your make and model numbers in hand. Mine is a Craftsman (Chamberlain) made in 1999 with the door sensors so I was good to go. NOTE: Garage door openers have a limit to the number of remotes they can support. My Craftsman supports 4 remotes. With two HomeLink-connected cars, the remote door opener, and the smart hub I am now at the max allowed by my opener. As a result, I had to decommission my "clickers". Do your homework and factor this into your plans.
"These guys were really great! They were the first ones to respond to my request, and were able to come out immediately. They showed up an hour before they were scheduled, and completed my garage door installation in about an hour and a half. The charge was only $95, which I thought was well worth it. I would definitely hire them again, and recommend them to others."
There’s another reason new doors are superior to old ones: energy efficiency. Keep in mind, garage doors are large, and when they open, they let a lot of outside air into your home. While you may have significant insulation separating your garage from the rest of your home, eventually that temperature differential will start to influence your energy bills.
Whether you're planning on moving in the future or you're fixing up your forever home, replacing a garage door can provide an excellent return on investment and boost your home's resale value. According to Remodeling magazine's 2016 Cost vs. Value report, garage door upgrades provide a nationwide average return on investment of over 90%, making it one of the top five home improvement projects. To learn more about the cost of installing garage doors, visit our garage door and opener installation and repair cost guide.
Torsion springs have three advantages over extension springs: They’re quieter, safer and easier to fine-tune. Torsion springs are quieter because you don’t have a spring knocking against a roller track. They’re safer because when a spring breaks, it usually stays on the bar. Finally, you can fine-tune the tension on a torsion spring so the door is perfectly balanced. Setting the tension on torsion springs has always been very dangerous, but torsion and extension spring systems with easy, do-it-yourself tensioning (Photo 7) are available. If you don’t use one of these DIY-friendly, easy tensioning systems (Clopay EZ-Set Spring and Wayne-Dalton TorqueMaster are two brands), you should hire a professional to release and set the tension on a torsion spring.
While you can certainly redo any security features on your garage door, it is often wise to replace the entire door if in fact that is the way a burglar gained access to your house. A new security code may seem like enough, but you don’t know how the thief figured out the old code in the first place. If the motor was disengaged, the issue might be a design flaw in the door itself. The best way to ensure that the thief doesn’t return or another thief doesn’t take advantage of the same unknown security weakness is to install a new door. Again, doing so with give you access to the kinds of robust security features that are being installed and implemented in the newest garage doors on the market.
My garage door would stop half way up and my son-in-law advised me to have a professional come take a look at it. My daughter asked her neighbor who she called last year because her neighbor had such good things to say about the technician and the company. She got the number and set up the appointment with a very nice young lady. The technician, Jose Rosario, arrived right on time and took the time to listen to my daughter explain everything to him about the door. He then took the time to look over the door, get it operational and write out a very informative break-down of my options. He broke it down to just getting the door operational to replacing the door parts (springs, rollers, etc.) all the way to replacing the door parts and the opener. He had all of the prices broken down and did not try to lead me in any direction I did not feel pressured at all to make a decision. I decided to have all of it replaced due to the fact that, at this very moment, my car was in the body shop being repaired and painted because the garage door had come down on it as I was backing out a week prior. Another reason for my decision was the fact that Jose told me that everything is covered - parts and labor - by Precision Door. This is a rarity these days! Jose installed the new opener and all of the door parts and explained everything to me very clearly. I am extremely pleased with my new door opener and will highly recommend Precision Door to everyone!
How about considering older workers, those who retire early, have great work ethics, and could learn a new trade. After sitting at a deskfor thirty years, or more, but have 20 good years left to work, how about training to be a bricklayer, or operate a bobcat , etc. Lots of great folks out there, who could use the income to supplement Social Security.
10The type of garage door shown provides the necessary lift assistance with a “torque tube.” If you intend to use an opener, wait to install the tube. Otherwise, install the torque tube according to the manufacturer’s directions. Roll up the door about 4 feet to check for the alignment of the tracks, and make any adjustments. Then tighten all fasteners.
It’s been more than 30 years since we first started serving the Bakersfield area and all of Kern County, CA, and our approach has remained the same for these three-plus decades: we take care of your garage door needs as quickly and professionally as possible. Here’s a look at what you can expect when you choose King Door for Kern County garage door repair services:

Sears can fix almost any broken garage door opener, regardless of the brand or where you bought it. Trying to repair a garage door opener yourself can be dangerous because of the spring tension. The Sears technicians who repair garage door openers are experts; they have the knowledge and experience to repair the garage door opener correctly and safety.
The Door sensor: This sensor communicates with the smart hub using Bluetooth to indicate door operation and open/ closed condition. During installation it is paired to the smart hub which is best performed with the unit attached to a closed door between 3’ and 10’ from the smart hub. By design, Bluetooth distance is limited to 33’ but don’t count on consistent operation at this extreme end of the range. Consider this distance during installation and future operation.

The torsion springs on steel rolling doors work the same way as other torsion springs in the garage door industry. When the door is closed, the spring is wound. The spring is secured to a spring anchor bracket on one end and to the shaft on the other. When the steel rolling door opens, the spring in the barrel supports most of the door weight. The remainder of this weight is lifted by the chain hoist or the operator.
Because it was a Saturday and I knew the garage door company I usually use wasn't open week-ends. I decided to look on the internet for week-end workers. The first site that came up was Precision Overhead Garage. Their website said if you call before noon, you can get an appointment that day. Even though it was 1pm, I decided to call anyway. After explaining that I couldn't close or open my garage door, they told me they would go ahead and schedule a time that day...even though it was after their same-day service cut off time of noon. They told me the technician would arrive between 3pm-5pm and he would call before coming (that was nice because I was able to run errands locally and not have to wait at home for those 2 hours). I also have to mention that although the company used an answering service to take the call and schedule the appointment, the gentleman that helped me was also very professional and courteous. Derrick, the technician that was assigned to the repair, called to tell me he was on his way. It was also within the arrival timeframe the company had promised. When he got to my house, he was polite and professional. He assessed the problem and made sure that I was clear about the cost of the repair and the cost of the service call. I agreed and he immediately went to work. He never tried to sell me any other services or parts or repairs that weren't needed. He was finished within 45 minutes and the door worked perfectly. I was able to pay with a credit card even without them being able to verify the information because it was a week-end. I was very impressed that they did that, especially because I was a new customer and had no history with them. Obviously, by my 5-star rating, I would recommend them to anyone who is looking for a professional garage door company. Thank you to Derrick and Precision Overhead Garage Door Service!!
However, in addition to potentially causing injuries to the under-prepared DIYer, a malfunctioning door can become a safety hazard to you and your family. Keep in mind, according to the National Electronic Injury Surveillance System (NEISS), over 13000 people checked into hospitals with garage related injuries in the United States in 2007. You don’t want to turn a loved one into a statistic just to save a few dollars!
When I called to schedule the repair service, I was transferrd 5 times and spoke with 6 service reps. Each rep was very confused by my request to get my garage door repaired. One rep actually told me that Sears doesn't repair garage doors. I had to tell her that Sears installed the door. When I finally found a rep who could schedule my service, it took one week for the appointment. 

When you install a new garage door, replace all the hardware as well. If your automatic opener doesn’t have an automatic reversing system that includes photoelectric eyes, replace it. Doors with openers also require two extra pieces of hardware that you’ll see in Photo 4: a support strut (usually included in the door kit) and an opener bracket (not included). For doors with torsion springs located over the door, spend the $50 or so to have a garage door professional release the tension.
×